BBXZK - ALUMINUM EPOXY RUSTMATE #1220
- MSDS: BBXZK
- Manufacturer: ZYNOLYTE PRODUCTS INC
- Product Name: ALUMINUM EPOXY RUSTMATE #1220
- National Stock Number: 8030-00F007451
Product Identification
Product ID:ALUMINUM EPOXY RUSTMATE #1220
MSDS Date:01/01/1987
FSC:8030
NIIN:00F007451
MSDS Number: BBXZK
Responsible Party
Emergency Phone: (213) 513-0700
Cage: 25461
Contractor
Telephone: 310-513-0700
Cage: 25461
Ingredients
ALKYD RESIN SOLUTION
ACGIH TLV: 100 PPM
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
OSHA PEL 100 PPM
Hazards
Effects of Overexposure:IRRITATION OF THE RESPIRATORY TRACT/SKIN/EYES.
HEADACHE/DIZZINESS/UNCONSCIOUSNESS/CONFUSION/COMA.
First Aid
First Aid:EYE: FLUSH W/WATER 15 MINS. SKIN: WASH W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING/DON'T REUSE UNTIL LAUNDERED. INHALATION:
REMOVE TO FRESH AIR/PROVIDE OXYGEN IF BREATHING IS DIFFICULT.
INGESTION: DO N'T INDUCE VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:103F (CC)
Lower Limits:1.0%
Upper Limits:6%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:DON'T USE WATER, EXCLUDE AIR, USE SCBA.
Unusual Fire/Explosion Hazard:HANDLE AS FLAMMABLE LIQUID. CLOSED
CONTAINER MAY RUPTURE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, ELECTRICAL STATIC & FRICTIONALPARKS). VENTILATE AREAS,
CONTAIN BY DIKING OR ABSORBENT.
Handling
Handling and Storage Precautions:DON'T >120F. AVOID PROLONGED SKIN
CONTACT.
Exposure Controls
Respiratory Protection:ORGANIC CANISTER MASK OR AIR PACK.
Ventilation:USE ADEQUATE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RESISTANT
Eye Protection:GUARD AGAINST SPLASHING
Other Protective Equipment:IMPERVIOUS PROTECTIVE CLOTHING/PROVIDE
SHOWERS & EYEWASH.
Supplemental Safety and Health
MSDS DATE: 2/3/87.
Chemical Properties
Boiling Pt:B.P. Text:300F
Vapor Pres:2
Vapor Density:>1
Spec Gravity:1.27
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:NIL
Appearance and Odor:TYPICAL MINERAL SPIRITS
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SOURCES OF IGNITION, FLAMES, HOT SURFACES,
SPARKS.
Hazardous Decomposition Products:SMOKE, TOXIC VAPORS, FUMES, GAS, DUST,
OR MIST.
Disposal
Waste Disposal Methods:DISPOSE OF ALL WASTES IN ACCORDANCE WITH
FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.